HPR3V3 is an optional accessory to the PRESTO programmer for programming of stand-alone 3.3 V devices (as for example DataFlash Memories).
The PRESTO programmer can supply a programmed device with 5 V. However, some devices require 3.3 V supply voltage and 3.3 V logic levels on their pins. In such c..
HPR1V2 is an optional accessory to the PRESTO programmer for programming of the devices with supply voltage and logical levels between 1.2 and 3.3 V (as for example Xilinx CoolRunner-II).
The PRESTO programmer can program devices with signal levels between 3 and 5 V ±10 %, but sometimes it is necess..
FORTE - very fast and flexible High-Speed USB programmer
FORTE is a very fast and flexible High-Speed USB In-Circuit Serial programmer for a wide range of popular components - microcontrollers, serial EEPROM and Flash memory chips, CPLDs and others.
FORTE is equipped with an effective overcure..
ISP2ZIF is an adapter for programming of all types of devices with In-Circuit Serial/In-System Programming (ICSP/ISP), especially with the PRESTO programmer.
The adapter is provided with the 40-pin Zero Insertion Force socket (ZIF) which accepts 300 to 600 mils wide devices.
ISP2ZIF works well..
Device support includes:
IC, dsPIC, AVR, Atmel 8051, eCOG, serial EEPROM & Flash, JTAG, CPLD, AT91SAM7 32-bit ARM-based MCUs, Texas Instruments MSP430 support.
PRESTO is a powerful, very fast and cost effective programmer for wide range of popular components - microcontrollers, serial ..
PRESTO to AVR Connector Adapter
HPRAVR is optional accessory to the PRESTO programmer for programming of the AVR microcontrollers in an application with standard ISP10PIN connector. This connector is usually used on the boards with the AVR processors like STK500...